A

B

C

D

RUBBER WASHERS

used throughout bike to protect

plastic and painted parts

A #51-05-082-100  -           $ .25 each or

                                    $9.00 per pack/50

B  #0021-060-000P -           $ .20 each or

         flat washers           $3.00 per pk/50

C  #0985-060-003P -           $ .20 each or

      6mm  nylock nuts     $4.00 pk/50

D  #0933-060-203P  -         $ .25 each or

      6 x 20mm bolts        $4.00 pk/25

Rubber Mud Flap

For Front Fenders

Mud flap used on  motorcycles with aluminum front fenders.

Top of mud flap measures 3.5" wide x 6" long

Two 6mm mounting holes on top for bolting to the  fender.
#51-08-012-000 -        $6 each or 10 for $50 

PLASTIC HELMET VISORS

Visor has 3 adjustable snaps that adjust to fit any open faced helmet.

#99-HP-17534 white colored visor        $8 ea

Limited quantities – available while supply lasts

BARUFFALDI Tear-off Helmet Visor

Designed by Roger DeCoster. Incorporates clear tear-offs on the visor so that at the start of muddy races you merely put your head down, look through the visor, and remove tear-offs as needed to keep your goggles mud free. Has 3 adjustable snaps for easy helmet installation.

#99-HP-17560 smoke color visor -   Sold out

clear plastic replacement “Tear-offs” for

Baraffaldi helmet visor

#99-HP-17561 – 3 sets for $1

face protector to fit XR500 series SuperSeer gogles

Blue  or  Red  -      sold out

face protector to fit XR500 series SuperSeer gogles

Yellow or  Black    -   sold out

Model 503

SuperSeer Replacement Lenses

fits XR500 series gogles - size 7-11/16" (195mm) wide

   3-3/16" (80mm) high

available in Amber, Polarized, Clear,

Green - all weather, Smoke Brown & Fog Cutt*R

close-out priced at  $1 each

Model 504

SuperSeer Replacement Lenses

fits XR500 series gogles - size 8-1/16" (205mm) wide

   3-1/4" (82mm) high

available in Amber, Polarized, Clear,

Green - all weather, & Smoke Brown

close-out priced at  $1 each

Model 505

SuperSeer Replacement Lenses

fits XR500 series gogles - size 7-11/16" (195mm) wide

   3-1/4" (82mm) high - has 2 side holes

available in Amber, Polarized, Clear,

& Smoke Brown

close-out priced at  $1 each

Hi-Point BLUE FORK GAITERS

for 70's and early 80's mini bikes

8" long, fits 27mm upper fork, 48mm lower leg

Close-out priced at   $15 pair

  Flywheel puller for Honda, Kawasaki, & Husqvarna

  22mm x 1.5 pitch right hand (Male) thread

 #99-PUL-22150 -      $24 each

         fits the following models:

 HONDA - XL-XR 250/ 350/ 500/ 600/ 650    VF 500/ 700/ 750 vt/ 1000/ 1100vt

               V45/ 65   VFR 750   FT/ GB 500   NX650   TL250

 KAWASAKI - 1985-95 KLR250    1984-86 KLR600 A/B    1987-95 KLR650 A

                1990-91 KLR650 B Tengai

 HUSQVARNA - fits most 1990-present WX and WR series 2 stroke enduro models

A

B

HANDLEBAR CLAMPS

FOR 1968-71 CERIANI TOP FORK PLATES

A - #2-4-000  -          $3 each
             chrome U-bolt
B - #2-3-000 -            Sold out

              saddle clamp

Indian side panel decal

Indian MI-175 Side Panel Decal

Vinyl self adhesive decal printed in red, white & blue

measures 10.5" in length - available only as shown

Close-out priced at  $2 each

    A             B                     C

Reproduction Honda Contact Points

A- #99-HP-22-88801   -    $5 each

          CB350/360 Right (Honda #30203-286-004)

B- #99-HP-22-88802   -     Sold out

          CB350/360 Left (Honda #30204-286-004)

C- #99-HP-22-88803   -      $5 each

          CB450/GL1000 Right  (Honda #30203-292-003)

#99-LAB1

  2 styles - cut to fit length

 #99-LAB1 -      $10 each

   small end I.D. 62mm (2-1/2")

   large end I.D.  70mm (2-3/4")

   length 130mm (5-1/8")

NUMBER PLATE BRACKETS

For mounting front number plate to front forks.

Bracket snaps onto front fork tubes and is held

in place with large rubber band (included). Made of stainless steel to prevent rusting.

#51-01-087-000 -              $20 each
       32mm size bracket - fits forks with 5-3/8" gap between tubes
#51-01-087-100 -              $20 each
       35mm size bracket -  fits forks with 5-1/4" gap between tubes
#51-01-088-000 -              $1.50 each
        extra rubber band

 Head Light Plastic Number Plates

size - aprox. 9" (230mm) x 11" (280mm)

   all have raised rounded edge on front side

#55-01-090-500   Yellow -      $8 each   

                          
#55-01-090-600    White -       $8 each 

Plastic oval number plates

size - aprox. 9" (230mm) x 11" (280mm)

   #55-01-090-100   Yellow -      $6 each   

                                3 for $15

   #55-01-090-200    White -       $6 each   

                               3 for $15

   #55-01-090-300    Green -       $6 each   

                               3 for $15

   #55-01-090-400    Red -       $6 each   

                               3 for $15

      Black  plates - sold out

Plastic Rectangular Number Plates

 small size - aprox. 10"  x 7-1/4"

   #55-01-090-021   Yellow -      $5 each   

   #55-01-090-023    Green -       $5 each   

   #55-01-090-024    Red -       $5 each   

   #55-01-090-025    Black -     $5 each   

Plastic Rectangular Number Plates

 large size - aprox. 12"  x 10"

   #55-01-090-031   Yellow -      $7 each   

   #55-01-090-032    white -       $7 each   

   #55-01-090-033    Green -       $7 each   

Euro Style bars, 7/8" with 3" rise, 25" across

# 65-00044 - low rise bars  -   $90   NOTE: only 3 in stock

Available for 3 fork sizes:

# 99-MAG-145 - fits 39mm forks  - close-out   $120 pair

# 99-MAG-147 - fits 40mm forks  - close-out   $130 pair

# 99-MAR-611A - close-out   $60 pair         NOTE: only 1 in stock

NOS Clip-On Bars
Black painted steel bar connects to alloy bracket with 32mm center hole.  clamps to top of fork leg. 43.5mm diam. x 1.8mm deep recess on top of mounting bracket.. 55mm extension from leg bracket. Extension bar measures8-3/4" long.

# 99-MAR-613B - close-out   $60 pair       NOTE: only 1 in stock